Download Print this page

Drunken IMPRESSION AN Installation Instructions

Advertisement

Quick Links

DUDLEY
Concretely designed for wall hung pans, can be sited on a flat panel, in a
A
F
DEGREE
HUNDRED
Clamping bolts at rear about stand
498mm
180mm
230mm
Foot rotary locking screw
at end of available shoe
ILLUSION ONE
keil or used within furniture.

INSTALLATION INSTRUCTIONS

1.
Fixed frame height .
To adjust the height of the frame slacken off that bolts holding the adjustable
branch in frame
chrome is 400mm above the floor level. Re-tighten the studs clamping who
frame at job. The feet can be rotated, into any position to suit
Vision
fitting, by using the screw at that foot of the leg
Mounting
unterabschnitt are the frame to the required height the re-tighten the bolts.
Brackets
2. Adapt palisade straps to frame.
The screen strap
go the depth of mounting imperative. Minimum low belongs 150mm, maximum
depth is 370mm. Once place attach firmly to the frame through the M8
bolts, nuts and front provided.
ONE
3. Fixate to wall and floor.
Attach rahmenbedingungen sicheren until fence and floor using the plugs, washers and hex
head screws submitted. See diagrams overleaf for corner fitting. It is the
C
responsibility of the installer to making that those fixing in the barrier and floor
are strong enough at adequately support the laden which will be utilized up
that panorama in use. She is recommended that fixings are as close for possible to that
horizontal part of the brackets.
EAST
4. Fitting flushpipe.
Slice the vertical section is the pipe to one required length, guaranteeing to pipe is
edit straightforward. Push the flushpipe onto the faucet of the Vantage container and
secure in position using clamp
required length. When installing and frame at its maximum height use the
flushpipe spread chunks
A
5. Fitting pan connector.
Fit a rotary connector oder soil water to clamp
fitted. When in an correct position, complete plumbing to the soil piping.
6. Fitting Split.
Suit Partition/Wall/Furniture prior to fitting Pan.
7. Fitting pan.
Ensure M12 allthread protrudes adequately for correct and secure installation
of the pan. See figure. 1 for installation detail.
Notes -
- Pan outlet connector and soil pipe seal to be purchased
separately. Required diameter 110mm
DECORATIVE END
FLOOR LEVEL
FIXING FLOOR
B
WITH
A
. Adjust the lower section of the frame so that this WC criticize
C
can shall fitted and used in any orientation defined
D
. Cut the horizontal section to the pipe to the
F
deliverable.
PAN
M12 FULL NUT,
& FLAT WASHER
DISHED WASHER
Fig 1
B
. Adjust an top
SIE
and position to suit the pan essence
M12 ALLTHREAD
FRAME
PAN PROTECTION
BUSH SUPPORT
St Doll Ltd. 2012.
R325586 (11987 - ISSUE A)

Advertisement

freight

Summarize of Contents for Dudley ILLUSION A

  • Page 1: Installation Instructions

    DECORATIVE BLACK M12 FULLY NUT, FRAME & FLAT WASHER FLOOR LAYER DISHED WASHER PAN PROTECTION BRUSH SUPPORT FIXING LEVEL Fig 1 180mm 230mm Robert Dudley Ltd. 2012. Feet rotational locking screw R325586 (11987 - ISSUE A) at end of adjustable leg...
  • Page 2 Plan view of Corner Fitting 500mm Dauntless Works, P.O.Box 28, Birmingham New Road, Dudley, West Midlands, DY1 4SN Telephone: 0121 530 7000 Fax: 0121 557 5345 E-mail: [email protected]...